Glowing heat is often referred to as Infrared Radiation and works on the same principle as a microwave. Unlike standard heating devices, where the air in the room is heated, radiant heating system warms the objects and folk in the room. Radiant heat is conveyed through locations in the floor, in wall panels or in the ceiling. Here we’ll take a look at glowing floor heating systems.
If you’ve ever tiptoed over a cold bathroom floor first thing on a dark, chilly morning, you’ll appreciate the comfort offered by a radiant floor heating system. The radiant floor heating system is placed either under a tiled floor, inserted in a concrete floor or attached to the bottom of a wall-to-wall flooring mat.
Types of glowing Floor Heating Systems : There are three main types of glowing floor heating systems – an electrical radiant system that consists of electric cables placed or inserted under the floor, a radiant air system that consists of hot air pipes under the floor and a hydronic radiant system, where there are hot water tubes underneath the floor.
Many folk wish to install hydronic glowing systems as these are relatively low in cost than the other two glowing systems and require less electricity, which translates to lower electricity bills. The hot water in a hydronic glowing system is pumped from a boiler – a traditional wood, coal, gas or oil powered boiler or a solar heater – and passes thru polyethylene tubing placed under the room flooring. With the help of a zoning valve and thermostat, you can regulate the hot water flow to get the precise required room temperature.
In a hot air glowing floor heating system, hot air is pumped through pipes laid under the flooring. The hot air can come thru a regular furnace or a solar heater. Neither option is very practical vis cost and convenience. Employing a solar heater, for instance, may work during the day time but is sort of useless for the night. Of course you can combine the solar heating with a traditional furnace for the night, but then you have to contend with the incontrovertible fact that air cannot sustain heat for a significant period.
electric glowing floors, as mentioned, have electrical cables underneath. These work just fine , but can hike up your electricity bill lots. Inserting the electric cables in a thick concrete floor can reduce costs to some extent as the concrete will trap and store the heat for a couple of hours and you can turn off the heating system in this time. A tiled floor is also a good conveyor of heat, but if you have a floor covering that can put a spanner in the works. Floor coverings like a linoleum or a carpet cut the amount of heat rising from the floor, so either have a thin, light covering, if you have to have it, or place it only in specific areas. If you have a wooden floor, keep in mind the possibility of the wood cracking or twisting from the heat underneath. It is generally best to have a laminated wooden floor, which can withstand the heat better, rather than a complete wood en one.
If you liked this article about air conditioning service Dallas, then most definitely see this fantastic site centered around Dallas Heating and Air Conditioning.
Related posts:
- How To Get Started With Solar Pool Heating The strategy that most owners choose to go when it...
- Top 5 Ways to Save on Heating Bills As home heating costs go up, so do the number...
- Choosing The Right Type Of Patio Heater For Your Home If you're a homeowner who happens to live in an...
- The price of solar electricity Solar energy is a natural source of energy that comes...
- Solar Panels For Your Home Today You need to join the rest of the world to...
Comments on this entry are closed.